Products

SUPER DENSITY ADJUSTING SPEED FABRIC CUTTING ROLLING MACHINE 4G TYPE S.D.Ⅱ
SUPER DENSITY ADJUSTING SPEED FABRIC CUTTING ROLLING MACHINE 4G TYPE S.D.Ⅱ

Machine Type:
MODEL YL-D1 YL-D2 YL-D3 YL-D4 This machine has single-side lathe and double-side lathe,positive turning lathe and reverse turning lathe。
Please state clearly when ordering。For special dimension,welcome your to order。
Needle Cylinder Dia (in) 30'' 32'' 34'' 36''、38''
Roller Length (m/m) 2220 2300 2400 2500
Revolve Dia (m/m) 2580 2660 2760 2860
W+60 Centre of connecting distance (m/m) 2280 2360 2460 2560
Net Weight (kgs) 250
(270)
260
(280)
270
(290)
280
(300)
Features:
  1. This machine's design,differentiate suit single side lathe and double side lathe。
  2. This machines pick1 up no cog design,so no rub trace in cloth surface。
  3. This machines pick up heat cutting or motor cutting。﹙one choose﹚
  4. This machine pick up adjusting cloth spreading stand,can be adjust pull cloth angle and pull cloth centre back remove,usable adjusting cloth flat。
  5. This machine's back put rolling ''S72'' are adjust,measure adjust cloth depend on thick and slight,prevent press trace usable recive and roll up cloth。
  6. This machine roll up cloth system is special design,roll up easy and can not produce clear shadow。﹙water wave lines﹚
  7. This machine pick up all new adjust spread out cloth equipmnent,usable cloth side flat and reduce loss。
  8. This machine fittings gear,if change over to be applicable many cloth。
  9. This machine's cloth rod pick up outside sheath tube,when cloth rolled finish,tube tack out easy。
  10. This machine match stop safety equip,when cloth cutting not serious finish,shall be stop machine auto。
  11. This machine's rolling cloth track,have add hold in the frame,when cloth rolled finish tack out in easy。
  12. This machine chassis are casting stell and use 3 heavy bearing in chassis's up,middle and down place,prove centre firm of machine。
Speed rang of pull cloth:
  1. Single Side:Max﹙200mm/Rev﹚、Min﹙12.5mm/Rev﹚
  2. Double Side:Max﹙109mm/ Rev﹚、Min﹙7mm/ Rev﹚
Diameter limits of roll cloth:
Max:Ø350 mm

PAT. Pending NO.:
96217365、96222682、20072019563109、200820052200.1、96203883、200710034804.3、200720063055.2、200720064102.5

This machine outward measurement picture: